Cisco SR2016T-NA Reference Manual page 1176

show tech-support
show tech-support
To display general information about the router when reporting a problem to Cisco technical support,
use the show tech-support command in Privileged EXEC mode.
Syntax Description
page
password
ipmulticast
rsvp
Defaults
Does not display passwords and does not page the output.
Command Modes Privileged EXEC
Command History Release
12.0 T
12.0 T
12.1(3a)XL
12.1(3)T
12.2(2)XA1
12.2(4)YA
Usage Guidelines
The show tech-support command displays a large amount of configuration, run-time status, and other
information about the router for troubleshooting problems. The output of this command can be provided
to technical support representatives when reporting a problem.
The show tech-support command automatically displays the output of a number of different show
commands. The exact output depends on the platform, configuration, and type of protocols being used.
Typically, the output includes the output from the following commands, depending on platform:
Configuration Information
•
•
Cisco Broadband Cable Command Reference Guide
6-174
show tech-support [page] [password] [ipmulticast | rsvp]
Pages the output of the command so that it is displayed one screen at a time
Displays passwords in the configuration file
Displays the IP multicast related information by the show ip pim, show ip
igmp, show ip mroute, and other IP multicast show commands.
Displays the IP RSVP related information that is generated by the different
show ip rsvp commands.
Modification
This command was introduced for the Cisco 1700 series router.
This command was introduced for the Cisco 800 series router.
This command was introduced for the Cisco uBR905 cable access router.
Encryption module show commands added for the Cisco 1700 series
routers.
This command was introduced for the Cisco uBR925 cable access router.
This command was enhanced for the Cisco 806, Cisco 826, Cisco 827, and
Cisco 828 routers, the Cisco 1700 series routers, and the Cisco uBR905 and
Cisco uBR925 cable access routers by adding the output of Cisco Easy
VPN, IPSec, access list, and NAT/PAT show commands.
show version
show runningconfig
Chapter 6 Cable CPE Commands
OL-1581-07