Table of Contents
Advertisement
Installing the Hardware
7.
Plug the alerter interface into the AC outlet.
8. Test the external alert at the CMS supervisor console by selecting the
line button assigned to the alert and lifting the handset.
The alert should activate. If it does not, refer to Chapter 9, "Troubleshooting."
Figure 2-1 shows a CMS external alert connected to the MERLIN LEGEND
system with a SPIRIT CS Alerter Interface.
MERLIN LEGEND System control unit
Power
Supply
CO lines
Figure 2-1. CMS External Alert Connection
Installation Procedures
2-10
A l e r t
device
SPIRIT CS Alerter
Interface
Jack 20
CO lines to be
assigned to CMS
Alerter Interface Wiring
Control
Alerter
Interface
Unit
1 Black
1
Red
2
2
3 Green
3
Green
4
4
Advertisement
Table of Contents
