Table of Contents
Advertisement
Installing the Hardware
Install CMS external alert and alert interface (if applicable).
3.
Source: Page 2-9 in this guide.
4.
Assemble and install the CMS supervisor telephone and agent tele-
phones.
Source: MERLIN LEGEND Communications System Installation,
Programming, and Maintenance.
Install the CMS interface card in the CMS PC.
5.
Source: Call Management System Installation Guide.
6.
Change the default DIP switch setting on the VDC 600 board to
accommodate CMS (required only on the 6300 WGS and 6286 WGS
with a VGA graphics monitor).
Source: Page 2-11 in this guide.
7.
Connect the keyboard and monitor to the CMS PC.
Source: Installation instructions for the PC.
Connect the CU1 and CU2 ports on the CMS interface card (in the
8.*
CMS PC) to the MERLIN LEGEND control unit.
Source: Page 2-12 in this guide.
Install the voice announcement unit.
9.
Source: Installation instructions for the VAU.
10.
Connect the AUX port on the
the voice announcement unit.
Source: Page 2-14 in this guide.
11.
Install the printer.
Source: Installation instructions for the printer.
CMS
interface card (in the CMS PC) to
Installation Procedures
2-7
Advertisement
Table of Contents
