Table of Contents
Advertisement
Programming the MERLIN LEGEND System for CMS
4.
Remove non-CMS
lines/trunks from line but-
tons
Assign CMS lines/trunks
5.
to line buttons in the
order they appear on
Form 5a
Exit to System Program-
6.
ming
Copy Line
Assignments to CMS PC Ports
The two CMS PC ports (CU1 and CU2) must have the same line assignments
as the CMS supervisor's telephone, including the CMS external alert lines and
loop-backs. To save time and ensure that the line assignments are identical,
copy the CMS supervisor assignments to the extensions for CU1 and CU2.
For those extension numbers, refer to Form 5a, Direct Line Console (DLC)—
Analog.
Step
1.
Display copy from
screen
2.
Enter the CMS supervisor
extension and save entry
Press line but-
ton for each
line/trunk until
green LED is off
Press line but-
ton for each
line/trunk until
green LED is on
Exit
Exit
MLX-20L
Extensions
Line Copy
Single
Dial number
Enter
Setting Up the Operator Positions
Press function
key for each
line/trunk until
letter "G" is
erased
Press function
key for each
line/trunk until
letter "G"
appears
[F5]
[F5]
PC
[F6]
[F2]
[F1]
Type number
[F10]
1-17
Advertisement
Table of Contents
