AT&T Call Management System Installation And Programming Manual page 132

Troubleshooting
ERROR--No Configuration Found. ADMINISTER System.
Effect on Call Management: CMS cannot manage calls until this problem
is corrected. See "Fallback Plan" at the end of this chapter.
Possible Cause
One or more steps in
building shift
configurations was omit-
ted.
No startup configuration
was chosen.
ERROR--No Lines in CMS. ADMINISTER Lines.
Effect on Call Management: CMS cannot manage calls until this problem
is corrected. See "Fallback Plan" at the end of this chapter.
Possible Cause
One or more steps was
omitted in programming
CMS line groups.
Error Messages
9-6
Corrective Action
1. Display the Stored Shift Configurations
screen. Press [F8], [F4], [F1] .
2. Build at least one shift configuration
according to the instructions in Chapter
6, "Building a Shift Configuration. "
3. Restart CMS.
Select a startup configuration according to the
instructions in Chapter 6, "Building a Shift
Configuration."
Corrective Action
1. Display the Administer Lines and Line
Groups screen. Press [F8], [F4], [F3] .
2. Follow the instructions in Chapter 5, "Pro
gramming CMS Lines" to finish pro-
gramming line groups.
3. Make sure you have completed at least
one shift configuration as described in
Chapter 6, "Building a Shift
Configuration."
4. Restart CMS.