System Event Screen; Figure 3-74 Text-In Actions 2 Screen - Honeywell HRXDS16D1T User Manual

21. Highlight the desired box under the PTZ column, then press #. A list of PTZ
22. Highlight the box beside Spot Monitor, then press #. A list of SPOT monitors and
23. To save your Text-In changes, highlight Save, then press #.

System Event Screen

1.
98
Note For the Notify action, the notify item you select should be
enabled in the Notification setup screen and the DVR should be
registered in the RAS (Remote Administration System).
Figure 3-74
presets appear. Select the preset positions for each PTZ camera, where you want
PTZ cameras to move to when the DVR detects text input.
cameras appears. Each SPOT monitor can be associated with a camera. The DVR
will display the associated camera on the SPOT monitor whenever it detects an
input on the selected text-in device.
Select Cancel to exit the screen without saving the changes.
In the Event menu (see
System Setup screen appears.
Text-In Actions 2 Screen
3-54), highlight System Event, then press #. The
Figure
HRXDS Series DVR User Guide