System Event Screen; Figure 3-74 Text-In Actions 2 Screen - Honeywell HRXD9 User Manual

Configuration
19. Highlight the desired box under the PTZ heading, and press
20. Highlight the box under the Spot Monitor and press
21. You can save your Text-In changes by highlighting Save and pressing

System Event Screen

1.
Document 900.0856 Rev 3.00
11/07
Note For the Notify action, the notify item you select should be
enabled in the Notification setup screen and the DVR should be
registered in the RAS (Remote Administration System).
Figure 3-74
presets appears. Select the preset positions for each PTZ camera, this is where
you want PTZ cameras to move to when the DVR detects text input.
and cameras appears. Each SPOT monitor can be associated with a camera. The
DVR will display the associated camera on the SPOT monitor whenever it detects
an input on the selected text-in device.
Selecting Cancel exits the screen without saving the changes.
Highlight System Event in the Event menu and press
setup screen (Figure
Text-In Actions 2 Screen
3-75) appears.
. A list of PTZ
. A list of SPOT monitors
.
. The System Event
89