Calendar Search; Figure 4-14 Calendar Search Screen - Honeywell HRXDS16D1T User Manual

4.

Calendar Search

1.
2.
3.
118
a. You can use the Left and Right arrow buttons to highlight the year, month,
day, hours, minutes and seconds.
b. Use the Up and Down arrow buttons to change to the date and time you want
to search for video.
After you have set the date and time you want, press #.
c.
Then highlight Go and press #.
d.
The selected date and time display. (If no video was recorded during the selected
time, a message alerts you that no image was recorded at that time.) Use the
PLAY/PAUSE, RW, FF, Jog and Shuttle to review the surrounding video.
Figure 4-14
Days with recorded video display on the calendar with white numbers. You can
highlight the days with recorded video by using the arrow buttons. After you have
highlighted a day, press # to select it.
A time bar displays at the bottom of the calendar. Hours in which video was
recorded will be highlighted with blue. Use the Up and Down arrow buttons to
highlight the time bar. After the time bar is highlighted, select the time by using the
Left and Right arrow buttons.
Note The time bar is in one-hour segments. A highlighted segment
means that some video was recorded during that hour. However,
it does NOT mean video was recorded for the entire hour.
If the DVR's time and date have been reset to a time that is earlier than some
recorded video, it is possible for the DVR to have more than one video stream in
the same time range. Move to Select a Segment, and select the video stream you
want to search. See Appendix E, Time Overlap
time-overlapped video streams.
Calendar Search Screen
HRXDS Series DVR User Guide
for further information on searching