Active Cameo Mode; Pip Mode; Zoom Mode; Ptz Mode - Honeywell HRXDS16D1T User Manual

Operation

Active Cameo Mode

To enter the Active Cameo mode, press # in any multi-view format. The yellow outline
surrounding the video indicates the active cameo, and pressing the arrow buttons
moves the active cameo. Press # while in the Active Cameo mode to exit the Active
Cameo mode. The active cameo mode will remains in effect for 15 seconds if there is
no further operation.
In active cameo mode, press the button for the camera you want displayed as active
cameo. After setting the camera number to active cameo, the DVR moves the active
cameo to the next cameo. You can change the screen layout in this way.

PIP Mode

To display a Picture-in-Picture, press the DISPLAY button. You can change the location
of the PIP counterclockwise and clockwise by pressing the Up and Down arrow buttons
and change its size by turning the Jog Dial clockwise or counterclockwise.

Zoom Mode

To enlarge an area of the video, press the ZOOM button. For a few seconds after
pressing the ZOOM button, a PIP displays. Inside the PIP, a rectangle shows the area
that is enlarged. You can move the rectangle around using the arrow buttons. While in
the Zoom mode, you can enlarge the area more by pressing #. The Zoom mode options
are 2x, 3x and 4x. Exit the Zoom mode by pressing the ZOOM button. While in the Zoom
mode, the
setup screen (OSD tab).

PTZ Mode

If a user who has PTZ Control authority logs into the system, the user can control PTZ
cameras. The DVR will control cameras with Pan, Tilt and Zoom capabilities. Press the
PTZ button to enter the PTZ mode and press the button again to exit the PTZ mode.
You can control the camera using front panel control buttons, by setting up presets or
by selecting the expanded PTZ features.
1.
Document 800-04559 Rev D
11/09
icon displays in the bottom-left corner if Zoom is selected in the Display
Select the PTZ camera you wish to control by selecting it from the menu. The
icon displays on the PTZ camera screen.
105