Webguard Setup; Figure 3-30 Webguard Setup Screen - Honeywell HRXDS16D1T User Manual

6.
7.
8.

WebGuard Setup

1.
2.
3.
4.
64
Highlight the box beside DVR Name, then press #. Use the virtual keyboard to
enter the DVR name to be registered on the DVRNS server.
Highlight the Check box, then press # to check whether or not the name you
entered can be used.
Note The DVR name you entered should be checked by selecting
Check, otherwise the DVRNS changes will not be saved.
Note When entering no name or a name already registered on the
DVRNS server, an error message displays.
Highlight Save, then press # to register the DVR on the DVRNS server. Proper
DVRNS settings display the help desk information of the DVRNS server in the box
beside Help Desk.
On the Network setup screen (see
WebGuard screen displays.
Figure 3-30
Highlight Use WebGuard Service, then press # to toggle between On and Off.
See Appendix D, WebGuard
Highlight the box beside Port, then press #. Set the port number used when
accessing WebGuard by using the Up and Down arrow buttons to increase or
decrease the numbers.
To save your Network changes, highlight Save, then press #.
Select Cancel to exit the screen without saving the changes.
Figure 3-24), highlight the WebGuard tab. The
WebGuard Setup Screen
for detailed descriptions of the WebGuard service.
HRXDS Series DVR User Guide