Figure 3-26 Port Number Setup Screen - Honeywell HRXDS16D1T User Manual

4.
5.
6.
7.
60
Note You will need to get the appropriate IP Address, Gateway and
Subnet Mask from your network administrator.
Change the numbers by highlighting them and using the Up and Down arrow
buttons to increase or decrease the number. The factory default LAN settings are:
IP Address
Gateway
Subnet Mask
Highlight the box beside DNS Server. Press the Up and Down arrow buttons to
set the IP address of the DNS server.
Highlight the Port Number Setup... box, then press #. The Port Number Setup
screen appears.
Figure 3-26
Note You will need to get the appropriate Port Numbers for each RAS
and WebGuard related program (Admin, Callback, Watch,
Search and Audio) from your network administrator.
Change the numbers by highlighting them and using the Up and Down arrow
buttons to increase or decrease the number. The factory default Port settings are:
Remote Admin
Remote Callback
Remote Watch
Remote Search
Remote Audio
Note The system restarts automatically after changing the port
settings.
192.168.1.129
192.168.1.254
255.255.255.0
Port Number Setup Screen
8200
8201
8016
10019
8116
HRXDS Series DVR User Guide