Event Monitoring; Covert Camera - Honeywell HRXDS16D1T User Manual

If a user who has Color Control authority logs into the system, the user can adjust the
image. Pressing and holding a camera button for a few seconds displays an image
adjustment dialog. You can control brightness, contrast, hue and saturation for each
camera.

Event Monitoring

When an event occurs, the DVR will display the camera associated with the event if
Event Monitoring On is selected in the Display setup screen (OSD tab).
How the cameras are displayed depends on the number of cameras associated with
the event. If one camera is associated with the event, the DVR will display the camera
full screen. If two to four cameras are associated with the event, the DVR will display the
cameras on a 2x2 screen. If five to nine cameras are associated with the event, the DVR
will display the cameras on a 3x3 screen. If 10 or more cameras are associated with the
event, the DVR will display the cameras on a 4x4 screen.
Event monitoring lasts for the dwell time set for event recording. After the dwell time has
elapsed, the monitor returns to the previous screen unless another event has occurred.
If you want to return to the live monitoring mode before the dwell time has elapsed,
press the DISPLAY button or one of the camera buttons.

Covert Camera

If a camera is set up as Covert 1 in the Camera setup screen (Settings tab), that camera
will not be displayed unless a user with Covert Camera View authority logs into the
system. However, the camera title and status icons will be displayed on the monitor.
If a camera is set up as Covert 2 in the Camera setup screen (Settings tab), that camera
appears to be Off unless a user with Covert Camera View authority logs into the system.
The camera title will be grayed out and status icons will not be displayed on the monitor.
108
Note Any image adjustments you make will be applied to both the live
video on the monitors and the recorded video.
HRXDS Series DVR User Guide