Figure 3-73 Text-In Actions 1 Screen - Honeywell HRXDS16D1T User Manual

Configuration
17. The DVR can be set to react to text input. Text input can be:
18. Highlight the box beside Record, then press #. A list of cameras appears. You
19. Highlight the box beside Alarm-Out, then press #. A list of Alarm Outputs
20. Highlight the box beside Notify, then press #. You can toggle the entire list On
Document 800-04559 Rev D
11/09
Figure 3-73
• Associated with cameras
• Trigger an Alarm-Out connector
• Sound the DVR's internal buzzer
• Notify a number of different devices
• Move PTZ cameras to preset positions
• Display a camera on a SPOT monitor
can associate as many cameras with the Text Input as you wish. If the DVR
detects text input, it starts recording video from all the associated cameras.
Note For the Record action, the camera you select should be set to
the Event or Time & Event recording mode in the Record
Schedule setup screen.
appears. You can associate as many Alarm-Outs with the Text Input as you wish.
When the DVR detects text input, it triggers output signals on all the associated
Alarm-Out connectors. You can also have the DVR's internal buzzer sound if text
input is detected.
Note For the Alarm-Out action, the alarm output and beep you select
should be set to the Event mode in the Alarm-Out setup screen
(Schedule tab).
and Off by highlighting Notification, then press #. You can toggle the individual
items On and Off by highlighting that item, then press #.
Highlight OK, then press # to accept your changes.
Text-In Actions 1 Screen
97