Figure 3-32 Authentication Setup Screen; Figure 3-33 Notification Callback Setup Screen - Honeywell HRXDS16D1T User Manual

7.
8.
Notification Callback
1.
2.
3.
4.
5.
66
Highlight the box beside User/Password, then press #.
b.
c. Use the virtual keyboard to enter the user ID and password.
Figure 3-32
Highlight the box beside Sender and enter the sender's e-mail address. Use the
virtual keyboard to enter the e-mail address.
Note To be valid, the e-mail address must include the @ character.
Highlight the box beside Recipient and enter the recipient's e-mail address. Use
the virtual keyboard to enter the e-mail address.
On the Notification screen (see
Callback screen displays.
Figure 3-33
Highlight LAN, then press # to toggle between On and Off. When LAN is turned
On you can change the IP addresses.
Highlight the IP Address box that you want to change, then press #. Use the
arrow buttons to enter the IP address of the computer you want contacted during
an event. You can enter up to five IP addresses.
Highlight the box beside Retry and enter the number of times (1 to 10) you would
like the DVR to try contacting the computer.
To save your Notification changes, highlight Save, then press #.
Select Cancel to exit the screen without saving the changes.
Authentication Setup Screen
Figure 3-31), highlight the Callback tab. The
Notification Callback Setup Screen
HRXDS Series DVR User Guide