Turning On The Power; Initial Unit Setup; Logging On - Honeywell HRXDS16D1T User Manual

DISPLAY Button
available formats are: 4x4, 3x3, 2x2 and PIP.
ID Button on Remote Control
control controls that DVR without any additional operations. (See
on
If the system ID is 1 to 16, you must press ID on the remote control and then press the
number button (1 to 16) to control that DVR.
If the System ID of two or more DVRs is set to 0, those DVRs will react to the infrared
remote control at the same time.

Turning On the Power

Connecting the power cord to the DVR turns on the unit. The unit takes approximately
60 seconds to initialize.

Initial Unit Setup

Before using your DVR for the first time, you will want to establish the initial settings. This
includes items such as time and date, display language, camera, remote control, record
mode, network and password. Your DVR can be set up using various screens and
dialog boxes.
Throughout the screens you will see ↖. Highlight ↖ and press # to reset that screen to
its default settings.

Logging On

1.
42
Press DISPLAY to toggle between different display formats. The
page 44 for further information on setting the System ID.)
Press MENU to enter the setup screens. The Login screen appears.
HRXDS Series DVR User Guide
If a DVR System ID is set to 0, the infrared remote
Information Screen,