Spot Monitoring; Figure 4-5 Spot Monitor Menu - Honeywell HRXDS16D1T User Manual

Operation
If a user who has Covert Camera View authority logs into the system, the user can view
video from cameras set to Covert 1 or Covert 2 including the camera titles and status
icons.

Spot Monitoring

You can select the camera you want to display on a Spot Monitor.
1.
2.
3.
Document 800-04559 Rev D
11/09
Note When a camera is set up as Covert 1, the DVR displays the
camera title and status icons on the covert video. When set up as
Covert 2, the DVR displays only camera title on the covert video.
Press the SPOT button on the front panel or remote control, and select one of four
Spot Monitors.
Then, select the camera to be displayed on the Spot Monitor.
Figure 4-5
If you want to display more than one camera on a Spot Monitor, you can display
them sequentially. In the Spot Monitor selection mode, press the SEQUENCE
button on the front panel or remote control, or select Sequence On from the
menu to start displaying cameras sequentially.
Press the SEQUENCE button or select Sequence On again to stop sequencing on
the Spot Monitor. Any cameras that are Off, have lost video or are set to Covert
(unless the user has authority to view covert cameras) will be excluded from the
sequence.
Spot Monitor Menu
109