Table of Contents
Advertisement
Figure 3-7
Follow
Table 3-6
to set global System parameters.
Table 3-6
Field
DVR ID
DESCRIPTION
LOAD SETUP
DEFAULT
ADMIN
PASSWORD
NETWORK
PASSWORD
DATE
FORMAT
Rev 3.01
System Setup Screen
System Setup Fields
Description
Sets the name of the DVR.
Press SEL, use the LEFT and RIGHT arrow controls to navigate through
the position for each alphanumeric character. Use the UP and DOWN
arrow controls to change the selected character. Press SEL to save the
name.
Press SEL to view system information (System version, storage capacity,
IP address and MAC address).
Select ON to reset the system to the factory default settings.
Sets the administrator password. After selecting this menu item, you are
prompted for your current password and then the new password. Follow
the prompts to change and confirm the new password. The default
password is 1111. Use the arrow controls to change the password:
UP = 1
RIGHT = 2
DOWN = 3
LEFT = 4
Sets the remote access password. You need to enter this password
when connecting to this DVR through the RAS program (see
After selecting this menu item, you are prompted for your current
password (the default password is 1111) and then the new password.
Follow the prompts to change and confirm the new password.
Use the arrow controls to change the password as described in ADMIN
PASSWORD above.
Sets the desired date and time display format. Options are:
YYYY/MM/DD
MM/DD/YYYY
DD/MM/YYYY
YYYY-MM-DD
MM-DD-YYYY
DD-MM-YYYY
18
page
42).
Document 900.0399
08/08
Advertisement
Table of Contents
