Table of Contents
Advertisement
100 | Performance Series HREP2 DVR User Guide
2.
3.
4.
System Event Settings
You can set any action to an event related to the disk, recording, network or system. Like the
other events, you may notify the event to the user using the alarm/buzzer output, OSD pop-up
or email.
1.
2.
3.
4.
Disk System Event Settings
www.honeywell.com/security
Use the
,
,
, and
reaction to a video loss
•
ALARM OUT: Specify the alarm output channel if a video loss occurs.
•
: Specify the output of the buzzer if a video loss occurs.
•
: Select to send an email if a video loss occurs.
To apply the change, click APPLY at the bottom of the screen.
When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.
From SYSTEM SETUP
Use the
,
,
, and
reaction to each event.
To apply the change, click APPLY at the bottom of the screen.
When finished, press the EXIT button on the remote control or click CLOSE in the lower
part of the screen. The confirmation message appears and you will return to the previous
menu.
Figure 4-54
Disk System Event Settings
buttons on the remote control or use the mouse to specify the
EVENT, select SYSTEM EVENT.
buttons on the remote control or use the mouse to specify the
Advertisement
Table of Contents
