Figure 3-13 Time Sync Screen - Honeywell HRXDS16D1T User Manual

Synchronizing the DVR Time
You can set up time synchronization between the DVR and standard time servers that
are available in most time zones and countries, or between the DVR and another DVR.
1.
2.
3.
4.
5.
6.
7.
50
Note Holidays that do not fall on the same date each year should be
updated after the current year's holiday has passed.
On the Date/Time screen, highlight the Time Sync. tab. The Time Sync. screen
appears.
Figure 3-13
Highlight the box beside Automatic Sync., then press #. This toggles between
On and Off.
Highlight the box beside Time Server, then press #. A virtual keyboard appears
that you can use to enter the IP address or domain name of the time server.
Note You can use the domain name instead of the IP address if you
already set up the DNS server when setting up the LAN.
Highlight the box beside Interval, then press #. Set the time interval for
synchronization from 30 minutes to 1 day at various time intervals.
Last Sync-Time displays the last time the DVR was synchronized with the time
server.
Highlight Run as Server, then press #. Press # to toggle between On and Off.
When it is On, the DVR you are setting up will run as a time server.
To save your changes, highlight Save, then press #.
Select Cancel to exit the screen without saving the changes.
Time Sync Screen
HRXDS Series DVR User Guide