Figure 3-50 Schedule Setup Screen - Honeywell HRXDS16D1T User Manual

2.
3.
4.
5.
6.
7.
80
Figure 3-50
You can program the DVR to record only during certain times based on time, day
of the week, and holidays. The smallest time segment you can use is 15 minutes.
Highlighting Schedule On, then press # to toggle between On and Off.
In the Schedule On mode, the DVR records video based on the schedule
established in the Schedule screen.
When turning Schedule recording Off, you are prompted to confirm your decision,
and displays at the top-left corner of each camera screen. Panic recording will
function even when Schedule is turned off.
Note Changing the schedule mode will reset all event and action
statuses.
Highlight the +, then press # to add a schedule item.
Note The higher the number under the No. heading, the higher its
priority.
Highlight the box under the Day heading, then press # to change the days that the
scheduled recording will take place. Choose from: Sun, Mon, Tue, Wed, Thu, Fri,
Sat, M~F, Hol and All.
Highlight the box under the Range heading, then press # to change the time
range that the scheduled recording will take place. The smallest time segment
you can use is 15 minutes.
Highlight the box under the Mode heading, then press # to change the recording
mode that will be used. Choose from: No Record, Time, Event and Time & Event.
When the DVR is in the No Record mode, it will not record during the preset day
and time range as long as the PANIC button is not pressed. Use the No Record
mode when you do NOT want the DVR to record during certain times.
Schedule Setup Screen
HRXDS Series DVR User Guide
displays during panic recording.