The Control Panel - Fresenius Medical Care 2008K Operator's Manual

Chapter 1—Overview

The Control Panel

The control panel (see Figure 3) is located at the top, front of the 2008K machine and
contains key pads that allow the user to control the operation of the 2008K machine. Located
in the middle of the control panel is the touch screen that can display a variety of treatment
screens through which the operator can use to set treatment parameters and monitor the
treatment.
The touch screen provides a means of setting the treatment parameters and monitoring the
treatment and patient status during dialysis. The operator can access treatment screens and
set treatment parameters by pressing specific, identified sites (buttons) on the screen. Most
numbers and parameters selected on the touch screen must be confirmed by pressing the
CONFIRM key on the front panel. This feature was designed to prevent a change in a
treatment value if the touch screen is accidentally bumped.
General
Operation
Section
Figure 3 – The Components of the Control Panel
20
Treatment
Display
Section
Extracorporeal Dialysate
Blood Circuit Control
Section Section
2008K Operator's Manual rev. K