Fresenius Medical Care 2008K Operator's Manual page 54

Chapter 3—Setting Treatment Parameters
1) The electrolyte profile of the
highlighted selection is
displayed in this column.
Note: If the machine is set up
for use with Citrasate® or
DRYalysate, a 'Citrate' meter
box will be displayed in the
dialysate constituent list.
2) Highlight the desired
selection by scrolling through
the choices using the
(up or down) keys on the data
entry keypad. Acetate
formulations can also be
selected as a treatment option.
3) When the desired type is highlighted, press
the CONFIRM key on the control panel to save
the selection and return to the "Dialysate" screen.
Note: Be sure the acid/bicarbonate concentrates
connected to the machine match the type
selected from the Concentrate menu.
4) Enter the prescribed Base Na+
and Bicarbonate values as described
in "Setting Treatment Parameters."
Figure 23 – Entering Concentrate Information
54


or
2008K Operator's Manual rev. K