The Control Panel - Fresenius Medical Care 2008K Operator's Manual

The Control Panel

The control panel (see Figure 3) is located at the top, front of the 2008K hemodialysis
machine and contains key pads that allow the user to control the operation of the 2008K
hemodialysis machine. Located in the middle of the control panel is the touch screen that can
display a variety of treatment screens which the operator uses to set treatment parameters and
monitor the treatment.
The touch screen provides a means of setting the treatment parameters and monitoring the
treatment and patient status during dialysis. The operator can access treatment screens and
set treatment parameters by pressing specific, identified sites (buttons) on the screen. Most
numbers and parameters selected on the touch screen must then be confirmed by pressing the
CONFIRM key on the control panel. This feature was designed to prevent a change in a
treatment value if the touch screen is accidentally bumped.
General
Operation
Section
Figure 3 – The Components of the Control Panel
2008K Hemodialysis Machine Operator's Manual Rev P
Treatment
Display
Section
Chapter 1—Overview
Extracorporeal Dialysate
Blood Circuit Control
Section Section
23