Fresenius Medical Care 2008K Operator's Manual page 43

To run the Pressure and Alarms tests: To run the Pressure and Alarms tests:
1) From any
screen, touch
Test & Options
2) From the
"Tests, Options"
screen, touch
Both Tests
Figure 16 – Starting Automatic Tests
Test Sequence
The automated test sequence consists of two distinct parts—Alarm tests and Pressure Holding
tests. The Pressure Holding Test, the Alarm test, or both tests can be started by touching the
corresponding button on the "Test & Options" screen and pressing the CONFIRM key. After a
long power down, however, only the Both Tests button is enabled.
2008K Operator's Manual rev. K 2008K Operator's Manual rev. K
3) Press
CONFIRM
Testing the 2008K g the 2008K
43 43