PLV-WF20 Expand Serial Command Functional Specifications
6.4 Input Status Read Command Table
Status read command
CR_INPUT [CR]
CR_SOURCE [CR]
CR_SYSTEM [CR]
CR_SRCINP1 [CR]
CR_SRCINP2 [CR]
CR_SRCINP3 [CR]
CR_SRCINP4 [CR]
CR_HMSLOT [CR]
CR_NMSLOT1 [CR]
CR_NMSLOT2 [CR]
CR_NMSLOT3 [CR]
CR_NMSLOT4 [CR]
CR_IDSLOT1 [CR]
CR_IDSLOT2 [CR]
CR_IDSLOT3 [CR]
CR_IDSLOT4 [CR]
6.5 Screen Status Read Command Table
Status read command
CR_SCREEN [CR]
CR_KYSTNMODE[CR]
CR_CEIL[CR]
CR_REAR[CR]
CR_VSCALE[CR]
CR_VPOS[CR]
CR_HSCALE[CR]
CR_HPOS[CR]
6.6 Lamp Status Read Command Table
Status read command
CR_LAMPREPL [CR]
CR_LAMPMODE [CR]
CR_AUTOLAMPCONTROL[CR]
CR_LAMPSTS [CR]
CR_INFLAMP [CR]
CR_PROJH [CR]
CR_HMLAMP [CR]
CR_LAMPH [CR]
6.7 Setting Status Read Command Table
Status read command
CR_LANG [CR]
CR_DISP [CR]
CR_BACKGND [CR]
CR_LOGO [CR]
Get selected Input
Get selected Source
Get selected System in Video Input mode
Get selected source for Input 1
Get selected source for Input 2
Get selected source for Input 3
Get selected source for Input 4
Get the total number of Slots
Get a card name inserted to Slot 1
Get a card name inserted to Slott2
Get a card name inserted to Slot 3
Get a card name inserted to Slot 4
Get ID information of Slot 1
Get ID information of Slot 2
Get ID information of Slot 3
Get ID information of Slot 4
Get selected screen size
Get selected Keystone store mode
Get selected ON/OFF of Ceiling
Get selected ON/OFF of Rear
Get setting status of V Scale
Get setting status of V Position
Get setting status of H Scale
Get setting status of H Position
Get information on Lamp replacement time
Get selected Lamp mode
Get setting status of dimmer function level.
Get Lamp lighting status
Get Lamp switching status
Get the projector total running time
Get the total number of lamps
Get information of actual Lamp running time
Get selected language
Get setting status of Display
Get setting status of Screen for no signal
Get setting status of Logo
Item
Item
Item
Item
14/68