System-Monitor Enable - 3Com 5500-EI PWR Reference Manual

system-monitor enable

Syntax
system-monitor enable
undo system-monitor enable
View
System view
Parameters
None
Description
Use the system-monitor enable command to enable real-time monitoring of the running status of the
system.
Use the undo system-monitor enable command to disable real-time monitoring of the running status
of the system.
This function enables you to dynamically record the system running status, such as CPU, thus
facilitating analysis and solution of the problems of the device.
By default, real-time monitoring of the running status of the system is enabled.
Enabling of this function consumes some amounts of CPU resources. Therefore, if your network has a
high CPU usage requirement, you can disable this function to save your CPU resources.
Examples
# Disable real-time monitoring of the running status of the system.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] undo system-monitor enable
update fabric
Syntax
update fabric { file-url | device-name }
View
User view
Parameters
file-url: Path plus name of a host software file in the Flash, a string of 1 to 64 characters.
3-17