3Com 5500-EI PWR Reference Manual page 1234

Field
OperMau
Power port class
PSE power supported
PSE power enabled
PSE pairs control ability
Power pairs
Port power classification
Link aggregation supported
Link aggregation enabled
Aggregation port ID
Maximum frame Size
MED information
Media policy type
Unknown Policy
VLAN tagged
Media Policy VlanID
Media Policy L2 priority
Media Policy Dscp
Location format
Location Information
PoE PSE power source
Description
Current speed and duplex state of the port
PoE device type, which can be :
PSE, indicating a power supply device
PD, indicating a powered device
Indicates whether or not the device can operate as a
PSE.
Indicates whether or not the device is operating as a
PSE.
Indicates whether or not the PSE-PD pair control is
available.
PoE mode, which can be Signal or Spare.
Port power classification of the PD, which can be:
Class0
Class1
Class2
Class3
Class4
Indicates whether or not link aggregation is supported.
Indicates whether or not link aggregation is enabled.
Aggregation group ID, which is 0 if link aggregation is not
enabled.
Maximum frame size supported
MED LLDP information
Media policy type, which can be:
Voice, indicating the device is capable of processing
voice data.
Unknown, indicating the media policy is unknown.
Indicates whether or not the media policy is unknown.
Indicates whether packets of the voice VLAN are tagged.
ID of the voice VLAN
Layer 2 priority
DSCP precedence
Location format, which can be:
Civic Address LCI, indicating normal address
information.
ECS ELIN, indicating
urgencies.
Location information
PSE type, which can be:
Primary, indicating a primary power supply
Backup, indicating a backup power supply
1-4
telephone number for