Tftp Source-Interface - 3Com 5500-EI PWR Reference Manual

Parameters
tftp-server: IP address or host name of the TFTP server to be connected to, a string of 1 to 20
characters. If the switch belongs to a cluster, the value cluster means to connect to the TFTP server of
the cluster. For the configuration of the TFTP server of a cluster, refer to the Cluster part in this manual.
ip-address: IP address to be set as the source IP address.
get: Specifies to download a file from the TFTP server.
source-file: Name of the file to be downloaded.
dest-file: File name used when a file is downloaded and saved to the switch.
put: Specifies to upload a file to the TFTP server.
source-file-url: Path and name of the file to be uploaded to the TFTP server.
dest-file: File name used when a file is uploaded and saved to a TFTP server.
Description
Use the tftp tftp-server source-ip command to connect to a TFTP server through the specified source
IP address, and perform download or upload operations. If the specified source IP address does not
exist, a prompt appears to show the command fails to be executed.
Examples
# Connect to the remote TFTP server whose IP address is 192.168.8.8 through the source IP address
192.168.0.1, and download the file named test.bin from it.
<Sysname> tftp 192.168.8.8 source-ip 192.168.0.1 get test.bin

tftp source-interface

Syntax
tftp source-interface interface-type interface-number
undo tftp source-interface
View
System view
Parameters
interface-type interface-number: Source interface that the switch uses every time it connects to the
TFTP server.
Description
Use the tftp source-interface command to specify the source interface of a TFTP client that the TFTP
client uses every time it connects to a TFTP server. The system prompts that the configuration fails if
the specified interface does not exist.
Use the undo tftp source-interface command to cancel the source interface setting. The switch uses
the IP address of the outbound interface in the local routing table as the source IP address to connect to
a TFTP server. The destination of the outbound interface is the subnet where the TFTP server resides
By default, no source interface is specified for the switch to connect to the TFTP server.
2-5