Test-Enable - 3Com 5500-EI PWR Reference Manual

Examples
# Configure the test type as an FTP test.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] remote-ping administrator ftp
[Sysname-remote-ping-administrator-ftp] test-type ftp

test-enable

Syntax
test-enable
undo test-enable
View
remote-ping test group view
Parameters
None
Description
Use the test-enable command to enable a remote-ping test.
Use the undo test-enable command to disable a remote-ping test.
Related commands: display remote-ping.
The result of the remote-ping test cannot be displayed automatically, and you need to use the display
remote-ping command to display the test result.
Examples
# Perform a remote-ping test on an ICMP test group with the administrator name and operation tag
being administrator and icmp respectively.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] remote-ping administrator icmp
[Sysname-remote-ping-administrator-icmp] test-type icmp
[Sysname-remote-ping-administrator-icmp] destination-ip 169.254.10.3
[Sysname-remote-ping-administrator-icmp] test-enable
1-35