Display Ip Source Static Binding; Ip Check Dot1X Enable - 3Com 5500-EI PWR Reference Manual

The above display information indicates that the DHCP snooping function is enabled, and the Ethernet
1/0/10 port is a trusted port.

display ip source static binding

Syntax
display ip source static binding [ vlan vlan-id | interface interface-type interface-number ]
View
Any view
Parameters
vlan-id: ID of the VLAN whose IP static binding entries are to be displayed.
interface-type interface-number: Type and number of the port whose IP static binding entries are to be
displayed.
Description
Use the display ip source static binding command to display the IP static binding entries configured.
If you specify a VLAN, all the IP static binding entries for the specified VLAN will be displayed. If you
specify a port, all the IP static binding entries for the specified port will be displayed.
Examples
# Display all IP static binding entries configured.
<Sysname> display ip source static binding
Type IP Address
==== =============== =============== =========
S 192.168.0.25
S 192.168.0.58
S 192.168.0.101
S 192.168.0.122
S 192.168.0.144
--- 5 static binding item(s) found

ip check dot1x enable

Syntax
ip check dot1x enable
undo ip check dot1x enable
View
Ethernet port view
Parameters
None
MAC Address Remaining
lease
0015-e20f-0101 infinite
0001-e201-4f01 infinite
000f-0101-0204 infinite
000f-e20f-21a3 infinite
0015-e943-712f infinite
---
3-9
VLAN Interface
==== =================
1 Ethernet1/0/2
1 Ethernet1/0/3
1 Ethernet1/0/2
1 Ethernet1/0/3
1 Ethernet1/0/2