History-Record Enable; History-Records - 3Com 5500-EI PWR Reference Manual

Examples
# Configure the retaining time of the history record for a test group to 240 minutes.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] remote-ping administrator icmp
[Sysname-remote-ping-administrator-icmp] history keep-time 240

history-record enable

Syntax
history-record enable
undo history-record enable
View
remote-ping test group view
Parameters
None
Description
Use the history-record enable command to enable history record.
Use the undo history-record enable command to disable history record.
By default, history record is disabled. You should configure to save history record as needed.
If you need to save history record, enable it.
If you disable the history record after enabling it, the saved history record will be deleted and the
maximum number of the history record for you to save will not be changed.
If you do not need to save history record, disable it. At this time you can also configure the number
of the history record to be saved, but the history record will not be saved.
Use the display remote-ping history command to view the history record.
Examples
# Enable history record saving.
<Sysname> system-view
System View: return to User View with Ctrl+Z
[Sysname] remote-ping administrator icmp
[Sysname-remote-ping-administrator-icmp] history-record enable

history-records

Syntax
history-records number
undo history-records
View
remote-ping test group view
1-20