Display Lldp Status - 3Com 5500-EI PWR Reference Manual

The number of
The number of
The number of
The number of
The number of TLVs discarded
The number of TLVs unrecognized
The number of neighbor information aged
out
The number of
The number of
The number of
The number of

display lldp status

Syntax
display lldp status [ interface interface-type interface-number ]
View
Any view
Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Description
Use the display lldp status command to display the LLDP status of a port.
If no port is specified, this command displays the LLDP status of all the ports.
Examples
# Display the LLDP status of all the ports.
<Sysname> display lldp status
Global status of LLDP: Enable
The current number of LLDP neighbors: 0
The current number of CDP neighbors: 0
LLDP neighbor information last changed time : 0 days, 0 hours, 4 minutes, 40 seconds
Transmit interval
Hold multiplier
Reinit delay
Field
frames transmitted
LLDP
frames received
LLDP
frames discarded
LLDP
error frames
LLDP
frames transmitted
CDP
frames received
CDP
frames discarded
CDP
error frames
CDP
: 30s
: 4
: 2s
Description
Total number of the
LLDP
the port
Total number of the
LLDP
port
Total number of the
LLDP
Total number of the
LLDP
the port
Total number of the
LLDP
Total number of the
LLDP
recognized on the port
Number of the neighbor information entries that
LLDP
have aged out on the port
Total number of the
CDP
Total number of the
CDP
Total number of the
CDP
Total number of the
CDP
port
1-12
frames transmitted through
frames received through the
frames dropped on the port
error frames received through
TLVs dropped on the port
TLVs that cannot be
frames transmitted on the port
frames received on the port
frames dropped on the port
error frames received on the