Password - 3Com 5500-EI PWR Reference Manual

Example
# Display the information about the password control for super passwords.
<Sysname> display password-control super
Super's password settings:
Password aging:
Password length:
Password composition:

password

Syntax
password
View
Local user view
Parameter
None
Description
Use the password command to set the system login password for a local user in interactive mode.
Note that:
A password can be a combination of characters from the following four types: letters A to Z, a to z,
numbers 0 to 9, and 32 special characters (including the space and ~ ` ! @ # $ % ^ & * ( ) _ + - = { }
| [ ] \ : " ; ' < > , . / ).
The password must conform to the related configuration of password control when you set the
local user password in interactive mode.
Example
# Configure the login password for the local user "test" to 9876543210.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] local-user test
New local user added.
[Sysname-luser-test] password
Password:**********
confirm:**********
Updating user password, please wait............
# Change the login password for the local user "test" to 0123456789.
[Sysname-luser-test] password
Password:**********
Confirm :**********
Updating user password, please wait............
Enabled(90 days)
Enabled(10 Characters)
Enabled(1 type(s), 1 character(s) per type)
1-3