Display Memory; Display Power - 3Com 5500-EI PWR Reference Manual

Examples
# Display the working states of the fans.
<Sysname> display fan
Unit 1
Fan 1 State: Normal
The above information indicates that the fan works normally.

display memory

Syntax
display memory [ unit unit-id ]
View
Any view
Parameters
unit-id: Unit ID of a switch.
Description
Use the display memory command to display the memory usage of a specified switch.
Examples
# Display the memory usage of this switch.
<Sysname> display memory
Unit 1
System Available Memory(bytes): 30045312
System Used Memory(bytes): 15698468
Used Rate: 52%
Table 3-4 Description on the fields of the display memory command
System Available Memory(bytes)
System Used Memory(bytes)
Used Rate

display power

Syntax
display power [ unit unit-id [ power-id ] ]
View
Any view
Field
3-5
Description
Available memory size of the system, in bytes
Used memory size of the system, in bytes
Percentage of the used memory