Lldp Admin-Status - 3Com 5500-EI PWR Reference Manual

Capabilities TLV
Network Policy TLV
Location Identification TLV
Extended Power via MDI TLV
Inventory TLV
Table 1-5 display lldp tlv-config command output description
LLDP tlv-config of port number
interface-type interface-number
NAME
STATUS
DEFAULT
Basic optional TLV
IEEE 802.1 extended TLV
IEEE 802.3 extended TLV
LLDP-MED extend TLV

lldp admin-status

Syntax
lldp admin-status { disable | rx | tx | txrx }
undo lldp admin-status
View
Ethernet interface view
YES
YES
NO
YES
YES
Field
YES
YES
NO
YES
YES
Description
TLVs that are currently sent through a port
TLV type
Indicates whether or not TLVs of a specific type are
currently sent through a port
Indicates whether or not TLVs of a specific type are sent
through a port by default
Basic TLVs, including:
Port description TLV
System name TLV
System description TLV
System capabilities TLV
Management address TLV
IEEE 802.1 extended TLVs, including:
Port VLAN ID TLV
Port and protocol VLAN ID TLV
VLAN name TLV
IEEE 802.3 extended TLVs, including:
MAC-Physic TLV
Power via MDI TLV
Link aggregation TLV
Maximum frame size TLV
MED related LLDP TLVs, including:
Capabilities TLV
Network Policy TLV
Extended Power-via-MDI TLV
Location Identification TLV
Inventory TLV, which can be hardware revision TLV,
firmware revision TLV, software revision TLV, serial
number TLV, manufacturer name TLV, model name
TLV, and asset id TLV.
1-15