Feature Tacacs - Cisco Nexus 5500 Series Command Reference Manual

feature tacacs+

feature tacacs+
To enable TACACS+, use the feature tacacs+ command. To disable TACACS+, use the no form of this
command.
Syntax Description
This command has no arguments or keywords.
Command Default Disabled
Command Modes Global configuration mode
Command History Release
5.2(1)N1(1)
Usage Guidelines You must use the feature tacacs+ command before you configure TACACS+.
When you disable TACACS+, the Cisco NX-OS software removes the TACACS+ configuration.
Note
Examples This example shows how to enable TACACS+:
switch(config)# feature tacacs+
This example shows how to disable TACACS+:
switch(config)# no feature tacacs+
Related Commands Command
show feature
show tacacs+
Cisco Nexus 5500 Series NX-OS Security Command Reference
108
feature tacacs+
no feature tacacs+
Modification
This command was introduced.
Description
Displays whether or not TACACS+ is enabled on the switch.
Displays TACACS+ information.
Chapter F Commands
OL-27883-02