Adding Staples; Finisher Sr4010 - Ricoh Pro C550EX Operating Instructions And Troubleshooting

Adding Staples

This section describes what to do when staples need replacing.
• Keep your hands clear of the booklet finisher tray when pulling out or pushing in the finisher's staple
unit. You can trap your fingers if you do not.
• Stapling failures or jams may occur if you use a staple cartridge other than that recommended.
• If you cannot pull out the upper unit, there are staples remaining inside the cartridge. Use all the
staples, and do not add more.
• Refill the stapler according to the finisher type. Check the type if you are unsure. For details about
type of finisher, see "Appendix", About This Machine.

Finisher SR4010

This section describes how to add staples to the Finisher SR4010.
Adding Staples
3
BAZ033S
67