4. Configuration
IEEE 802.11b (Wireless LAN) Configuration
Configure the printer to use IEEE 802.11b (Wireless LAN). The following table shows the control panel
settings and their defaults. These items appear in the [Host Interface] menu.
Communication Mode
Channel
4
Communication Speed
SSID
WEP
• Ethernet and wireless LAN (IEEE 802.11b) cannot be used at the same time.
• To use IEEE 802.11b (Wireless LAN), set the following using the control panel: press the [Menu] key,
and then select [Host Interface], [Network], [LAN Type], and then [IEEE 802.11b]. In addition, set
the IP address, subnet mask, gateway address, DHCP, Frame Type (NW), and active protocol as
explained in p.67 "Ethernet Configuration".
1.
Press the [Menu] key.
76
Setting Name
802.11 Ad hoc
13
11
Auto
blank
Off
ATU050S
Default