Ieee 802.11B (Wireless Lan) Configuration - Ricoh CL4000DN Setup Manual

Configuration

IEEE 802.11b (Wireless LAN) Configuration

Configure the printer to use IEEE 802.11b (Wireless LAN). The following table
shows the control panel settings and their default values. These items appear in
the "Host Interface" menu.
Setting Name
Comm. Mode
Channel
Trans. Speed
SSID
WEP Setting
❒ To use IEEE 802.11b (Wireless LAN), select "IEEE 802.11b" for "LAN Type"
in "Network Setup" in the "Host Interface" menu, and then set "IP Address",
"Subnet Mask", "Gateway Address", "DHCP", "Frame Type (NW)" and "Active
Protocol" under "Network Setup". For details about setting items under "Con-
figuring the Printer for the Network", see Software Guide.
❒ The 802.11b interface unit cannot be used simultaneously with a standard
ethernet interface.
❒ In the "SSID" menu, if blank is specified in 802.11b Ad hoc mode or Ad hoc
mode, "ASSID" appears.
A
Press the {Menu} key.
"Menu" appears on the display.
Default Value
802.11 Ad hoc
• Inch version
(1-11) 11
• Metric version
(1-13) 13
Auto
blank (ASSID)
Not Active
90