KAPERSKY ANTI-VIRUS 5.0 - FOR WINDOWS WORKSTATIONS Administrator's Manual page 97

Application management using the local interface
In order to create/modify the on-demand scan task schedule,
1.   U se the On-Demand Scan tasks link in the left section of the
Settings tab.
2. In the window that contains the list of scan tasks (see Figure 28)
select the task for which you need to create/modify the schedule
and press the Properties button.
This will open a fine-tuning window for this task (see Figure 29). To configure the
schedule switch to the Schedule tab (see Figure 43).
In order to enable the automatic scheduled task launch, check the Run by the
schedule box.
If you would like to receive notifications about the updates about to be
performed, check the Prompt for confirmation when run by the schedule box.
If this box is checked, a Scheduled task launch window (see Figure 44) will be
displayed on the screen before a scheduled scan task is launched. Press the
Start button to start the scheduled scan. In order to postpone the scan for some
time, select the required interval in the drop-down list and press the Delay
Figure 43. Creating a new task. The Schedule tab
97