Managing Kaspersky Anti-Virus Configuration - KAPERSKY ANTI-VIRUS 5.0 - FOR WINDOWS WORKSTATIONS Administrator's Manual

111
Application management using the local interface
You can configure the settings for the reports log in the Additional settings
window (see Figure 58), which is displayed after clicking the corresponding
hyperlink in the left frame of the Settings tab (please see details in section
5.10.4 on page 112). Here you can define the maximum duration for storing
reports and enable/disable inclusion of informational messages to the detailed
report.
5.10.3. Managing Kaspersky Anti-Virus
configuration
Kaspersky Anti-Virus allows you to create and use various configuration of its
operation. Now you can configure a certain application operation mode, save its
settings into a special configuration file, called a profile, and use this
configuration whenever you need.
In order to switch to managing the application's configuration, use the Managing
profiles link in the left section of the Settings tab (see Figure 3).
Using the window that will open (see Figure 57), by pressing the Save profile
button you can save the current application settings in a special configuration file
or by clicking the Load profile button – apply settings of a configuration file
created earlier to the operation of Kaspersky Anti-Virus. Loading of settings may
require your computer to be restarted as some modes are started at the
operating system startup.
In order to restore the recommended settings press the Restore profile button.
Figure 57. Managing profiles