Selecting The Scan Level - KAPERSKY ANTI-VIRUS 5.0 - FOR WINDOWS WORKSTATIONS Administrator's Manual

77
Application management using the local interface
In this case you will be able to launch such task by clicking on the link with its
name, located in the left section of the Protection tab (see Figure 2).
Depending on the situation, the following icons may appear left of the task name:
– this icon indicates that for a schedule has been setup for this task to be
used to ensure its automatic launch.
– indicates that the task is currently running.
In order to create an additional scan task, use the Create button in the On-
Demand Scan tasks window (see Figure 28). Details about creating the task
see section 5.6 on page 91.
In order to remove the task, select it in the list and press the Delete button.
However you have to remember that you can remove from the list only those
tasks that were added manually. System tasks cannot be deleted. Besides, you
cannot delete tasks that are being performed at the moment.

5.3.3.1. Selecting the scan level

Select one of the levels pre-defined by the Kaspersky Lab's experts (see Figure
30) in the Scan level settings drop-down list on the Settings tab (see section
Chapter 4 on page 34). By default the recommended anti-virus scan level
settings will apply.
You can configure your own settings based on the settings of any level. In this
case the protection level will be changed to User-defined settings. Such user-
defined settings will not be saved when you return to the settings of any of the
three pre-defined levels.