Working In The Administrator's And The User's Mode - KAPERSKY ANTI-VIRUS 5.0 - FOR WINDOWS WORKSTATIONS Administrator's Manual

Hide thumbs Also See for ANTI-VIRUS 5.0 - FOR WINDOWS WORKSTATIONS:
Table of Contents

Advertisement

118
You can impose the following restrictions:
Pause anti-virus scan when the system load exceeds ...% – pause
the on-demand anti-virus scan if the file system load is above the
specified level. Once the file system load decreases to the allowable
level, the scan will be resumed. Using a slider or the entry field to the
right of the setting specify the allowable file load level (in percents)
above which scheduled scans cannot be started.
Do not perform scheduled scan if the battery charge is below -
cancel scheduled scans if you are using a laptop computer if the battery
charge is below the specified value. Using a slider or the entry field to
the right of the setting specify the allowable battery charge level (in
percents) below which scheduled scans cannot be started.
5.10.7. Working in the administrator's and
the user's mode
Kaspersky Anti-Virus can operate in two modes: the administrator's mode and
the user's mode. The use of these modes may be convenient if there is another
user who has access to your computer. You can prevent this user from changing
the anti-virus settings, disabling the real-time protection or closing Kaspersky
Anti-Virus. In the user's mode the application interface will change and
unavailable settings will be hidden (for example, the Settings tab will not be
displayed in the main application window).
You can enable the use of the user's and administrator's modes using the local
interface or the Kaspersky Administration Kit application (see section 6.2.2.14 on
page 151).
In order to enable the use of the user's and the administrator's modes
using the local interface,
Check the Use password for application protection box on the
Security tab (see Figure 61) in the Kaspersky Anti-Virus additional
settings window. Enter the password in the Password field and re-enter it
in the Confirm password field.
This setting applies only to the on-demand scans (for
example, to the scan of selected objects). Real-time anti-virus
protection will not be affected.
This setting is available only if Kaspersky Anti-Virus is
installed on a laptop computer powered from a battery.
Kaspersky Anti-Virus 5.0 for Windows Workstations

Advertisement

Table of Contents
loading

Table of Contents