KAPERSKY ANTI-VIRUS 5.0 - FOR WINDOWS WORKSTATIONS Administrator's Manual page 83

Application management using the local interface
section 5.3.3.2 on page 80), a prompt for the password will be displayed after the
scan is completed.
You can choose whether the prompt for the password is displayed by
checking or unchecking the Do not ask for password when scanning
objects box in the scan settings (see section 5.3.3.1 on page 77). By
default, only the checkbox for the Maximum protection level is
unchecked.
In the Password field, enter the password to be used to access the archive file
and click OK. The application will continue scanning the archive and the objects
it contains after the password is entered.
While processing (disinfecting, deleting) objects within archives,
Kaspersky Anti-Virus unpacks the archive being processed into a
temporary folder, scans its objects, processing objects, packs them
back using the same name and copies to the original location, replacing
the original existing archive. The same processing procedure is
provided for processing password-protected objects contained in the
archive. The difference is that after the processing objects will be
packed into the archive without using the password.
To scan another password-protected archive, Kaspersky Anti-Virus automatically
applies the password used for the previous archive to the next archive to be
scanned. If the password is incorrect, you will be asked to enter a new password.
If you do not know the password, the application will be unable to scan
password-protected archives. We recommend that you click Skip and proceed
with the scan.
If an archive file contains password-protected objects, click the Skip archive
button to exclude them from the current scan. All other objects inside the archive
Figure 33. Entering password to scan an archive
83