Help System - KAPERSKY ANTI-VIRUS 5.0 - FOR WINDOWS WORKSTATIONS Administrator's Manual

Application management concepts
list of settings used to perform the scan. In order to hide the bottom part,
use the
In order to access the quarantine window (see section 5.10.1.2 on page 103),
follow the View Quarantine
If a full computer scan is being performed, you can use the same window to
select a mode that turns off the computer after the scan is completed. This mode
is useful if, for example, you start the computer scan at the end of the business
day and you do not want to wait until it is finished.
However, the use of this mode requires the following preparation: before the
scan is started, you have to disable prompting for password when scanning
objects (see section 5.3.3.1 on page 77) if it is enabled, set automatic processing
of dangerous objects, their deletion or placing into quarantine or recording
information into the report (see section 5.3.3.2 on page 80). As the result of
these actions, the interactive mode of the application operation will be disabled
and the scan will not be interrupted (that is, prompts will not be displayed).
In order to turn off the computer after the scan is complete, check the Turn off
computer after the scan is complete box in the scan window.

3.2.5. Help system

Comprehensive application reference information is available from the Support
tab of the main application window by simply following the
section of the tab.
If you have a question on a particular dialog box, press the <F1> key or click
Help in the bottom left-hand corner of the dialog box.
button.
link.
Help link in the left
33