Vsl: Channel Tab; Loading Scenes And Presets From Vsl - PRESONUS STUDIOLIVE 24.4.2 Owner's Manual

7 SOFTWARE — Universal Control, Capture and StudioLive Artist
7.2 VSL: Virtual StudioLive

7.2.3 VSL: Channel Tab

7.2.4 Loading Scenes and Presets from VSL

Loading a Scene
80
The Channel Tab provides a detailed over view of the Fat Channel parameters
for the Selected Channel. The Selected Channel will always be shown above the
Gate section. It is important to remember that you have continuous bi-directional
control. If you wish to grab a point in the EQ with your mouse, for example, you
will be changing the parameters both in VSL and in real-time on your StudioLive.
To access the Fat Channel for Auxes 1-6, FXA, FX, B, as well as Aux Ins A and B, you
will need to press the Select button on the StudioLive. You can then load presets
and make adjustments using VSL from within the Channel tab.
PreSonus StudioLive
As stated in the previous section, the Browser
window in VSL functions much in the same way
as the Browser in Studio One. This means that to
load a Scene or preset from the Browser window,
you simply select it and drag it over the mixer
or channel you wish to load it on. Scenes and
presets can be dragged from either the On Disk
or the Device Memory section of the Browser and
dropped onto the Overview or the Channel tab.
To load a new scene on your StudioLive, select
it from the Browser window and drag it over the
mixer in either the Overview or the Channel tab.
The window will grey out indicating that a new
scene is about to be loaded. Please note: only the
parameters that have been enabled for recall on
the StudioLive will be recalled on the mixer.
See section 5.1 for more details.
24.4.2
™