PRESONUS STUDIOLIVE 24.4.2 Owner's Manual page 78

7 SOFTWARE — Universal Control, Capture and StudioLive Artist
7.2 VSL: Virtual StudioLive
Add New Button
Remove Button
Back-up Tab
78
Creates a New Scene or Preset
Deletes a Stored Scene or Preset
Creates and Restores Backups of Your StudioLive
PreSonus StudioLive
In the On the Disk and Device Memory sections
of the Browser, you will see the Add New button.
Clicking this button will immediately create a new
Scene or preset. If you want this new preset to be
temporarily stored in VSL and immediately sent
to the StudioLive's internal memory, add the new
preset in the Device Memory section. If you would
prefer to have this new preset stored in permanent
memory on your computer, use the Add New button
in the On the Disk section. In either case, the new
preset can be sent to your StudioLive at any time.
In the On the Disk section of the Browser, notice the
Remove button. Clicking this button will delete a
stored Scene or preset.
The Backup tab allows you to create complete
snapshots of your StudioLive. This can be
especially useful when completing a project that
may need to be revisited in the future. To create
a backup, simply click on the Backup button.
To restore any backup file, select it in the On the
Disk portion of the Browser and click the Restore
button. You will be warned that any Scene or preset
currently loaded in the Device Memory section of
the Browser will be overwritten. Once your Backup
is restored, you can click the Send button to transfer
your Scenes and presets back to the StudioLive.
24.4.2
™