Advanced Wdm Features (Pc Only) - PRESONUS STUDIOLIVE 24.4.2 Owner's Manual

6 Connecting to a Computer
6.4 Using Your StudioLive as an Audio Interface

6.4.4 Advanced WDM Features (PC only)

70
Like the FireStudio-family interfaces, the StudioLive features advanced WDM
features to enhance its use as an audio interface. In the upper left-hand
corner of the Universal Control Launcher window, you will find the Settings
menu. From here, you can configure your WDM input and output streams. For
more information on Universal Control, please consult the next section.
Mac users: Please skip to the next section for important information
about using your StudioLive as your main Core Audio device.
1. In the Launch window, go to Settings | WDM setup.
2. The WDM Channel Mapper window will open. By default,
WDM Outputs 1 and 2 are routed to StudioLive Channels
1 and 2. As previously mentioned, we recommend that
they be set, instead, to Channels 25 and 26, so as not to
use input channels on your StudioLive for WDM playback.
To begin, check the box next to Output. Click on WDM 1
(front left) and drag it down to place it next to StudioLive
2 Track In Left. Click on WDM 2 (front right) and drag it
down to place it next to StudioLive 2 Track In Right.
Your stereo WDM playback will now be routed directly
to the main FireWire return buttons in the 2 Track In
and Monitor buses in the StudioLive Master Section.
PreSonus StudioLive 24.4.2
™