4
Controls
4.6
Main Output Bus
Subgroup Meters
Main Output Bus
4.6
Main Select Button
Main Fader
Main Bus Meters
44
44
Displays the Level of the Subgroups.
In the upper-right corner of the StudioLive are the Subgroup meters, which display
the levels of the subgroup outputs.
Enables Fat Channel Viewing.
As previously described in section 4.1.1, the Select button
routes its channel through the Fat Channel, allowing you
to add dynamics processing, EQ, panning, etc.
Controls the Level of the Main Output.
The fader controls the overall level of the main stereo output.
The white area above the fader can be used as a scribble strip. Use
only oil pencils. Other types of pens or pencils cannot be wiped off.
To clean the scribble strip, use a lightly damp cloth to remove the
writing. Spit works good, too.
Displays the Level of the Main Output.
In the upper right corner of the StudioLive are the Main meters, which display the
output levels of the main stereo bus.
PreSonus StudioLive
24.4.2
™