PRESONUS STUDIOLIVE 24.4.2 Owner's Manual page 58

5 Scene, Presets, and the System Menu
5.2 Graphic Equalizers
58
To begin, use the Value encoder to scroll to an empty position in the GEQ
Preset library. Press the Next button again to navigate to the first letter of the
preset name. Turn the Value Encoder clockwise or counter-clockwise to change
the letter. The StudioLive allows you to customize the name with uppercase
and lowercase letters, as well as a selection of numerals and punctuation
marks. You can insert a space by simply pressing the Tap button. Once you
are satisfied with your changes, press the Store button. It will illuminate while
the GEQ preset is being written to the StudioLive's internal memory. Once
the GEQ preset is saved, the Store button will return to its unlit state.
Once you have made your selection, press the Recall button. If at any time you
would like to cancel this operation, simply press the Load button again.
PreSonus StudioLive
When you press the GEQ button on your StudioLive,
the Graphic EQ menu will be displayed on your
LCD screen. There are 8 mono Graphic EQs in
your StudioLive 24.4.2. These Graphic EQs are
assignable in stereo pairs. Each GEQ can be assigned
to the Mains, Subgroups 1-4 or Aux 1-10. The bus
assignment can only made from an odd numbered
GEQ. The even numbered GEQ will automatically
be assigned to the other half of the stereo pair. For
example, if you assign GEQ 1 to Subgroup 1, GEQ
2 will automatically be assigned to Subgroup 2.
Each of the 8 Graphic EQs can be controlled
individually or as a stereo unit. To copy the left
side (odd) GEQ settings to the right side (even),
simply page down to the ride side and press the
Recall button. Pressing the Recall button while
using an odd numbered GEQ will flatten it.
Use the Page Up and Page Down buttons to
navigate between Graphic EQs. Use the Next and
Prev buttons to navigate through each GEQ screen
and the value knob to change a parameter.
Like all other parameters on your StudioLive, your
Graphic EQ settings can be stored and recalled.
have created a GEQ setting that you would like to
save to the GEQ Preset library, press the Save button
in the Fat Channel while that GEQ is active. You will
notice that the LCD will display the GEQ Save menu.
To load a preset to any channel on the StudioLive,
first press the GEQ button and Page down to the
desired GEQ. From the Fat Channel, press the Load
button. You will notice that LCD now displays
the GEQ Load menu. Use the Value encoder
to locate the preset you would like to use.
24.4.2
™
If you